石油支撐劑壓力試驗機，陶粒砂壓力試驗機，石英砂壓力測試機，石英石抗壓強度試驗機，陶粒砂壓力測試機，石油支撐劑壓力性能試驗機。

產品介紹：
該機型主要適用于壓裂用石油支撐劑、陶粒砂、石英砂等顆粒狀物體的抗壓、抗破碎試驗，是石油天然氣勘探、研究院、質檢、大專院校等機構的*設備。
Compatible with ISO 13503-2:2006
For use with frac sand, resin coated sand and ceramic proppant
Carver Inc. is proud to introduce Model CMG28-12-PCR proppant Crush Test press. This Monarch Series press meets the critical demands of ISO 13503-2:2006 with unsurpassed cycle repeatability. The proportional hydraulic system is capable of applying a constant rate of 3.8 MPa/min. (2000 PSI min.) from 2 ton to 28 ton clamp force within a ±2.5% deviation. The operator interface allows easy setup of press control parameters and includes ample recipe storage.

Compression force: 2-28 ton
Minimum 1,275 psi on a 2" diameter crush die
Maximum 17,800 psi on a 2" diameter crush die
Hardened plates: 12” L-R x 12” F-B fully guided platens to ensure parallelism
Positive stop on platens for centering the crush die
Open daylight: 6”-12”
Cylinder stroke: 6”
Self-contained hydraulic system
Available with and without 2” ID crush die (compatible with ISO 13503-2)
“Mini” ViewPoint control system including:
         • Allen Bradley programmable controller
         • PanelView Touch screen interface
         • Closed- loop control of clamp pressure
         • Recipe storage (up to 30 recipes of 24 segments)
         • Two hand close buttons
Polycarbonate safety guards around the clamp area with manual sliding interlocked operator gate
Dimensions: 40” w x 35” d x 74” h
Weight: 1,900 lbs